| Subject | Text |
| codes for panasonic tv for URC24 | Hello, to program your remote control, look in my above description(walter58)
Codes for panasonic |
| Bosch Fridge/Freezer Not Working | I had this problem with my Bosch Fridge/Freezer. The compressor was receiving half-wave rectified a. |
|
|
| Code Needed For Nissan Juke Radio/Satnav/CD Player | Hi,
As title above,
Bosch Part No:- 7 612 830 050
Nissan Part No:- 25915BH20B
Many thanks |
| [quote:682c16038d="minnie"]There around 1.8 ohms by memory don't forget the jumpers 010 and 050. Als |
| Re: Bosch Fridge/Freezer Not Working | [quote="Anonymous"]I had this problem with my Bosch Fridge/Freezer. The compressor was rec |
| problem still here | I did all this , i checked R7731 R7726 , R7711 , R7716 (giving 2.0ohms) and the i resoldered the 2 j |
| The Codes for panasonic tv are 023,050,065,066,067,102,125,126,143,152,153,194. |
| Can anybody translate these into plain english for me? | Hello, the first half of this list was easy to figure out what the settings do. but I can't tell wha |
| Convergence IC's in this case are dual amplifiers. On IC does red and half of green. The other IC do |
| Did you check R7731/7726 1.8 ohm, R7711/7716 1.8 ohm, did you solder the 2 jumpers between the signa |
| There around 1.8 ohms by memory don't forget the jumpers 010 and 050. Also going by memory. Any open |
| [quote:7c03f7aab0="jts1957"]Jumpers, especially at locations 010 and 050 - resolder. Check F850, F85 |
| Your going to need a soldering iron with a thin tip, .050 solder wick, heat sink compound, and solde |
| Jumpers, especially at locations 010 and 050 - resolder. Check F850, F852, F853.
Wherever it says |
| Check F850 & F852. Replace the convergence ic's and solder up jumpers 010 and 050. |